Disconnect cable

  1. Make a note of the current cable routings and connections.This will assist you in reinstalling them properly.
  2. Remove ten screws securing top covers (front and back) to frame using a Phillips screwdriver.
    Description Qty
    1 10-32 screw 8
    2 # 8 screw 2
    3 Top cover 2
    4 Back panel 1
  3. Guide front top cover down cable to gain access to pulley assembly.
  4. Slide back panel upward and remove.
  5. Squeeze sides of top weight cover together and lift up.
    Description Qty
    1 Top weight cover 1
    2 Spiral pin 1
  6. Remove spiral pin connecting cable assembly using a hammer and a 3/16” pin punch.
Parent topic: If machine CANNOT fit through doorway