Remove weight plates

  1. Turn the increment weight adjusting knob to select 0 lbs (0 kg).
  2. Remove four Phillips head screws and plastic mount for guide rod access.
    Description Qty
    1 Top guide rod cap 2
    2 Guide rod 2
    3 Guide rod plate 1
    4 Phillips head screw 4
    5 Plastic mount 1
  3. Remove top guide rod caps. Top guide rod cap contains a compression spring that will fly if grasp is not released slowly. Slide spring loaded top guide rod cap down guide rod until cap is clear of frame. Slowly release grasp of top guide rod cap and set aside.
  4. Repeat above step for opposite guide rod.
  5. Lean guide rods slightly outward, away from machine. DO NOT put excessive pressure on guide rods, it will damage lower guide rod caps.
  6. Slide top weight up and out of the machine and set aside.
  7. Remove weight plates and set aside for re-installation later.
Parent topic: If machine CANNOT fit through doorway