Assemble frame

  1. Assemble Power Cage while machine is laying on the floor in a horizontal position.
  2. If ceiling height is less than 9 feet then Power Cage must be assembled in a vertical (standing) position.
  3. Place rubber feet on each foot of the frame.
  4. Attach upper support, handle support, and lower cross support for both sides.
    Description Qty
    1 Upper cross support 1
    2 Handle bar support 1
    3 Lower cross support 1
    4 Right frame 1
    5 Left frame 1
    6 Screw 2.5" 8
    7 Screw 3" 16
    8 Locknut 24
    9 Washer 24
Parent topic: If machine CANNOT fit through doorway