Remove pulley assembly

  1. Remove two button head socket cap screws (BHSCS) and two pulley shaft bolts securing top two pulley assemblies to pulley bracket using two 5/16” Allen wrenches.
    Description Qty
    1 Pulley shaft bolt 2
    2 BHSCS 2
    3 Pulley assembly 2
    4 Pulley bracket 1
  2. Remove pulley assemblies from pulley bracket.
  3. Remove BHSCS and pulley shaft bolts securing lower pulley assembly to pulley bracket using two 5/16” Allen wrenches.
    Description Qty
    1 Pulley shaft bolt 1
    2 BHSCS 1
    3 Lower pulley assembly 1
    4 Pulley bracket 1
  4. Remove pulley assembly from pulley bracket.
  5. Route cable up through top cover, guide rod plate, and pulley bracket.
  6. Set cable aside for rerouting.
Parent topic: If machine CANNOT fit through doorway