Remove foot glides

Plastic shipping foot glides are used on Cybex Strength Systems machines to protect the bottom of machines during transportation. These foot glides must be removed before a machine is placed in service, the shipping foot glides will cause the machine to be unstable.

Caution: Remove glides:

To avoid serious injury or property damage, remove foot glides before placing unit in service. If guides are not removed unit will not be stable.

  1. Raise the foot of the machine slightly off the floor remove foot glides. Do not install weight plates (if applicable) until all foot glides have been removed.
  2. Loosen each foot glide by striking foot glide with rubber mallet.
  3. Pry off foot guide using a flat head screwdriver.
  4. Place rubber feet (supplied with machine) on each foot of the frame.
Parent topic: Assembly Procedure