Pad Assembly

The following procedure describes how to install the upholstered pad assemblies to the unit.
  1. Attach the four 7 X 11-1/4 pad assemblies and hardware, then tighten to 40-50 in-lb / 4.5-5.6 Nm.
    Item Description Qty.
    1 7 X 11-1/4 Pad Assembly 1
    2 Retainer, CM/MJ Pulley 2
    3 Screw, M10 x 35mm 2
  2. Align the 13-3/4 X 10-3/4 pad assembly so its centered to the 7 X 11-1/4 pad assemblies.
    Item Description Qty.
    1 13-3/4 X 10-3/4 Pad Assembly 1
  3. Attach the 13-3/4 X 10-3/4 pad assembly and hardware, then tighten to 40-50 in-lb / 4.5-5.6 Nm.
    Item Description Qty.
    1 13-3/4 X 10-3/4 Pad Assembly 1
    2 Retainer, CM/MJ Pulley 2
    3 Screw, M10 x 35mm 2
  4. Attach the saddle pad assembly and hardware, then tighten to 40-50 in-lb / 4.5-5.6 Nm.
    Item Description Qty.
    1 Saddle Pad Assembly 1
    2 Washer, 3/8" SAE Flat Washer 2
    3 Screw, M10 x 60mm 2
Parent topic: Assembly Procedure