Strength Systems

PWR Play

Assembly Manual

• Chapter 1: Overview
  • 1.1: PWR Play Stations
• Chapter 2: Safety
  • 2.1: Safety Information
  • 2.2: Product Labels
    • 2.2.1: Label Locations
    • 2.2.2: Core (LPP-CORE)
    • 2.2.3: Core Connector - Adjustable Cable Crossover (LPP-CX)
    • 2.2.4: Core Connector - Accessory Storage (LPP-SX)
    • 2.2.5: Adjustable Cable Crossbar (LPP-CB)
    • 2.2.6: Adjustable Cable Crossover - Attached (LPP-CC)
    • 2.2.7: Adjustable Cable Handle Storage (LPP-HR)
    • 2.2.8: Adjustable 2:1 Cable (LPP-AC)
    • 2.2.9: Adjustable 4:1 Dynamic Cable (LPP-AD)
    • 2.2.10: Assisted Dip Chin (LPP-DC)
    • 2.2.11: Dip (LPP-DI)
    • 2.2.12: Dual Cable High (LPP-DH)
    • 2.2.13: Dual Cable Low (LPP-DL)
    • 2.2.14: Dual Cable Pulldown (LPP-DP)
    • 2.2.15: Dual Cable Row (LPP-DR)
    • 2.2.16: Power Pivot (LPP-PP)
    • 2.2.17: Power Pivot - Rope Pull (LPP-PR)
    • 2.2.18: Pulldown (LPP-PD)
    • 2.2.19: Punching Bag Anchor (LPP-BA)
    • 2.2.20: Rope Pull (LPP-RP)
    • 2.2.21: Row (LPP-RW)
    • 2.2.22: Stall Bars (LPP-SB)
    • 2.2.23: Station Panel (LPP-PA)
    • 2.2.24: Step (LPP-ST)
    • 2.2.25: Triceps Pushdown (LPP-TP)
    • 2.2.26: Versa (LPP-VA)
• Chapter 3: Components
  • 3.1: Accessories
  • 3.2: Cables
  • 3.3: Hardware Kits
  • 3.4: Head Plates
  • 3.5: Increment Weights
  • 3.6: Mid Mounts
  • 3.7: Mid-Low Mounts
  • 3.8: Low Mounts
  • 3.9: Placards
  • 3.10: Top Mounts
  • 3.11: Top-Low Mounts
  • 3.12: Top-Mid Mounts
  • 3.13: Weight Stack Labels
• Chapter 4: Assembly
  • 4.1: PWR Play Compatibility
  • 4.2: Optional Front Shroud
  • 4.3: MJ/PP Compatibility
  • 4.4: Remove Increment Weight Selector
  • 4.5: Tools Required
  • 4.6: Assembly Order
  • 4.7: Select Location
  • 4.8: Install Top Mounts
  • 4.9: Install Crossbar Connectors
  • 4.10: Install Weight Stacks
  • 4.11: Assemble LPP-HR
  • 4.12: Install Mid Mounts
  • 4.13: Install Low Mounts
  • 4.14: Install Carriages
  • 4.15: Install Cables
    • 4.15.1: Check Adjustable Carriage Tension
    • 4.15.2: Adjustable Carriage Adjustment Instructions
  • 4.16: Install Labels
  • 4.17: Install Panel Station
  • 4.18: Install Hole Plugs
  • 4.19: Install Snap Links
  • 4.20: Cable Routing
• Chapter 5: Cable Handling Guide
  • 5.1: Cable Terminations, Tensioning and Wear Guide
  • 5.2: Cable Terminations
  • 5.3: Tensioning Cable
  • 5.4: Strength Cable Wear Guide
  • 5.5: Insert Inspection
• Chapter 6: Bolt to Floor Guide
  • 6.1: Introduction
  • 6.2: Bolt to Floor Prerequisite
  • 6.3: Delivery and Installation Tips
  • 6.4: Anchor Type - Dynamic
  • 6.5: Anchor Specifications
  • 6.6: Pullout Force
  • 6.7: Tools Required
  • 6.8: Anchor Procedure
  • 6.9: Foot Dimensions