Install Pads

  1. Install bolts and washers securing back pad to back support using an 8mm Allen wrench.
    Item Description Qty.
    1 Back Support 1
    2 Back Pad 1
    3 3/8" Flat Washer 2
    4 M10 x 30mm Bolt 2
    5 Hole Plug 2

    Tighten bolts to 40-50 in-lb (4.5-5.5 Nm).

  2. Install hole plugs to back support using a rubber mallet.
  3. Install bolts and washers securing arm rest pads to left and right uprights using an 8mm Allen wrench.
    Item Description Qty.
    1 Right Upright 1
    2 Left Upright 1
    3 Arm Rest Pad 2
    4 3/8" Flat Washer 4
    5 M10 x 30mm Bolt 4

    Tighten bolts to 40-50 in-lb (4.5-5.5 Nm).

Parent topic: Assembly Procedure