Assemble Olympic Incline Bench

  1. Attach the left and right upright assemblies to the center frame assembly, check for level and tighten hardware to 20-25 ft-lbs (27-34 Nm).
    Item Description Qty.
    1 Left Upright Assembly 1
    2 M10 Hex Nylock Nut 3
    3 3/8 Washer 6
    4 Center Frame Assembly 1
    5 M10 x 1.5 x 90mm Screw 3
    6 Right Upright Assembly 1
  2. Install the head pad, back pad and seat pad. Tighten hardware to 40-50 in-lbs (4.5-5.6 Nm).
    Item Description Qty.
    1 M10 x 1.5 x 100mm Screw 3
    2 CM/MJ Pulley Retainer 5
    3 1-1/4 OD x 1/4 Spacer 5
    4 Head Pad 1
    5 Back Pad 1
    6 Seat Pad 1
    7 M10 x 1.5 x 80mm Screw 2
    8 M10 x 1.5 x 95mm Hex Screw 1
    9 3/8 Washer 2
    10 M10 x 1.5 x 95mm Screw 1
  3. If desired, peel and stick label from the multi-language general warning sheet and carefully place over the English (default) label.
    Item Description Qty.
    1 Multi-Language General Warning Sheet 1
Parent topic: Assembly Procedure