Before using this product, it is
essential to read this ENTIRE operation manual and
ALL assembly instructions. It describes equipment
setup and instructs members on how to use it
correctly and safely.
Avant d’utiliser ce produit, il est impératif de lire ce
manuel d’utilisation en ENTIER, ainsi que TOUTES les instructions de montage. Ce manuel
explique comment installer l’équipement, et comment l’utiliser correctement et sans
danger.
Any service, other than cleaning or user maintenance, must be performed by an authorized
service representative.
Caution: Any changes or modifications to this
equipment could void the product warranty.
Caution: Toute modification apportée à cet équipement pourrait en annuler la garantie.
FCC Warning - Possible Radio / Television Interference
EN ISO 20957 Class SA (Bikes, Cross-Trainer): Professional and / or commercial use.
EN ISO 20957 Class SB (Treadmill only): Professional and / or commercial use.
EN ISO 20957 Class S: Professional and / or commercial use.
Note: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed
to
provide reasonable protection against harmful interference when the equipment is operated
in
a commercial environment. This equipment generates, uses and can radiate radio frequency
energy, and if not installed and used in accordance with the instruction manual, may
cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required
to
correct the interference at his own expense.
EN ISO 20957 Class H: Home use.
EN ISO 20957 Class HA (Bikes, Cross-Trainer): Professional and / or commercial use.
Upright
SwitchCyle is for commercial use only.
EN ISO 20957 Class HB (Treadmill only): Professional and / or commercial use.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed
to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy, and if not
installed
and used in accordance with the user manual, may cause harmful interference to radio
communications. However, there is no guarantee that the interference will not occur
in a
particular installation. If this equipment does cause harmful interference to radio
or
television reception, which can be determined by turning the equipment off and on,
the user
is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.