Attach Inner Shrouds to Uprights

  1. Snap the front of the inner shroud into the tinnerman clips on the upright casting.
    Item Description Qty.
    1 Upright Inner Shroud, Right 1
    2 Upright Inner Shroud, Left 1
  2. Snap the tinnerman clips on the rear of the inner shroud into the plates on the L-shaped shroud covers.
  3. Secure with screw.
    Item Description Qty.
    3 Screw: M4.2 X 0.7 6G6G X 19, DIN, PHL, PAN, AB, ST, ZB 2
    12.4 in. lbs. / 1.4 Nm
Parent topic: Assembly Procedure