Attach Console Mount to Bridge

  1. Remove the right bridge cover from the bridge. After right bridge cover is removed, then remove the left bridge cover from the bridge.

    FIRST: Remove Right Bridge Cover (Front View)

    SECOND: Remove Left Bridge Cover (Front View)

    Item Description Qty.
    1 Bridge Cover, Right 1
    2 Bridge Cover, Left 1
  2. Attach console mount to bridge.
    Note: Follow tightening sequence for proper alignment!

    FIRST: Tighten screws to the front of the console mount.

    SECOND: Tighten screws to the top of the bridge.

    Item Description Qty.
    4 Console Mount 1
    5 Screw: M6 X 1-6G6G X 20, HXS, HXF, FHB, ST 4

    7.37 ft. lbs. / 10 Nm

Parent topic: Assembly Procedure