Assemble Bench

  1. Remove adjusting pin from crossmember assembly and front leg assembly.
    Item Description Qty.
    1 Front Leg Assembly 1
    2 Crossmember Assembly 1
    3 Adjusting Pin 1
  2. Rotate front leg assembly up and into place. Insert adjusting pin into crossmember assembly and through stop plate groove on front leg assembly.
    Item Description Qty.
    1 Front Leg Assembly 1
    2 Crossmember Assembly 1
    3 Stop Plate 1
    4 Adjusting Pin 1
  3. Place Hammer lock nuts into crossmember assembly. Install screws and lock washers securing rear leg assembly to crossmember assembly using a 3/4" wrench.
    Item Description Qty.
    1 Rear Leg Assembly 1
    2 Crossmember Assembly 1
    3 Screw, 1/2"-13 x 1.25" HHCS 2
    4 Lock Washer, 1/2" 2
    5 Hammer Lock Nut, 1/2" 2

    Tighten hardware to 20-25 ft-lbs (27-34 Nm)

Parent topic: Assembly Procedure