Custom Sign

Note: Super duty crossmember is required to install the custom sign.
  1. Install screws, washers, spacers, and lock nuts securing optional custom sign and backer plate to super duty crossmember using a 7mm Allen wrench and 17mm wrench.
    Note: Single custom sign can be installed on the front or rear of super duty crossmember.

    Single Custom Sign

    Double Custom Sign

    Item Description Qty.
    1 Super Duty Crossmember 1
    2 Custom Sign 1 or 2
    3 Backer Plate 1 or 2
    4 Screw, M10 x 1.5, 25mm 2
    5 Screw, M10 x 1.5, 30mm 2
    6 Screw, M10 x 1.5, 35mm 4
    7 Flat Washer, 3/8" 8
    8 Lock Nut, M10 4
    9 Spacer 2

    Tighten hardware to 40-50 in-lb (4.5-5.6 Nm).

Parent topic: Install Add-Ons