Assemble Frame Components

  1. Install screws and washers securing the front support leg to the tower frame using an 8 mm Allen wrench.
    Item Description Qty.
    1 Support Leg, Front 1
    2 Washer, Flat 3/8" 3
    3 Screw, M10 x 1.5, 25 mm 3

    Tighten hardware to 20-25 ft-lb (27.1-33.9 Nm).

  2. Install screws and washers securing the rear support leg to the tower frame using an 8 mm Allen wrench.
    Item Description Qty.
    1 Support Leg, Rear 1
    2 Washer, Flat 3/8" 3
    3 Screw, M10 x 1.5, 25 mm 3

    Tighten hardware to 20-25 ft-lb (27.1-33.9 Nm).

  3. Install screws and washers securing the seat frame assembly to the tower frame using an 8mm Allen wrench.
    Item Description Qty.
    1 Seat Frame Assembly 1
    2 Screw, M10 x 1.5, 25mm 8
    3 Washer, Flat 3/8" 8

    Tighten hardware to 20-25 ft-lb (27.1-33.9 Nm).

  4. Pull detent pin out and slide seat post assembly down into main frame.
    Tip: Break-Free CLP can be used to lubricate the seat post assembly. Spray Break-Free CLP, or apply with a cloth, to the plated seat post.
  5. Install screws securing seat glide bushing to main frame using a Phillips screwdriver.
    Item Description Qty.
    1 Seat Post Assembly 1
    2 Seat Glide Bushing 1
    3 Seat Frame 1
    4 Screw, M5 x 10, Phillips 2

    Tighten hardware to 30-39 in-lb (3.4-4.4 Nm).

  6. Install screws and washers securing the overhead frame assembly to the tower frame using an 8mm Allen wrench.
    Item Description Qty.
    1 Overhead Frame Assembly 1
    2 Screw, M10 x 1.5, 25mm 8
    3 Washer, Flat 3/8" 8

    Tighten hardware to 20-25 ft-lb (27.1-33.9 Nm).

  7. Install screws, washers, and locknuts securing the pulleys to the pulley brackets on the tower frame using an 8mm Allen wrench and a 17mm wrench.
    Item Description Qty.
    1 Pulley, 3.5" OD 4
    2 Screw, M10 x 1.5, 45mm 2
    3 Screw, M10 x 1.5, 50mm 2
    4 Washer, Flat 3/8" 6
    5 Nut, M10 x 1.5, Hex Nylock 2

    Tighten hardware to 8-10 ft-lb (10.8-13.5 Nm).

Parent topic: Assembly Procedure