Install Hook Plates

  1. Install bolts, washers, and hex nuts securing hook plate to right frame using an 8mm Allen wrench and 17mm wrench.
    Item Description Qty.
    1 Hook Plate 1
    2 M10 x 70mm Bolt 6
    3 M10 Hex Nylock Nut 6
    4 3/8" Flat Washer 12

    Tighten bolts to 20-25 ft-lb (27-33 Nm).

  2. Install bolts, washers, and hex nuts securing hook plate to left frame using an 8mm Allen wrench and 17mm wrench.
    Item Description Qty.
    1 Hook Plate 1
    2 M10 x 70mm Bolt 4
    3 3/8" Flat Washer 8
    4 M10 Hex Nylock Nut 4

    Tighten bolts to 20-25 ft-lb (27-33 Nm).

    Note: Do not install bolts to the bottom two holes of the hook plate on the left side.
Parent topic: Assembly Procedure