Assemble Frames

  1. Install bolts, washers, and hex nuts securing top cross brace to right frame using an 8mm Allen wrench and 17mm wrench.
    Item Description Qty.
    1 Right Frame 1
    2 Top Cross Brace 1
    3 M10 Hex Nylock Nut 2
    4 3/8" Flat Washer 4
    5 M10 x 130mm Bolt 2

    Hand tighten hardware.

    Note: Make sure drain holes in top cross brace are facing the backs of the frames.
  2. Install bolts, washers, and hex nuts securing rear cross brace and two weight horn assemblies to right frame using an 8mm Allen wrench and 17mm wrench.
    Item Description Qty.
    1 Rear Cross Brace 1
    2 Weight Horn Assembly 2
    3 3/8" Flat Washer 6
    4 M10 x 130mm Bolt 3
    5 M10 Hex Nylock Nut 3

    Hand tighten hardware.

  3. Repeat steps 1 and 2 to install left frame.
  4. Install bolts, washers, and hex nuts securing weight horn assemblies to right frame using an 8mm Allen wrench and 17mm wrench.
    Item Description Qty.
    1 Weight Horn Assembly 2
    2 M10 Hex Nylock Nut 5
    3 3/8" Flat Washer 10
    4 M10 x 120mm Bolt 5

    Hand tighten hardware.

    Note: Make sure arrow sticker on weight horn is pointing UP when installing the weight horns.
  5. Repeat step 4 for left frame.
  6. Tighten all bolts to 20-25 ft-lb (27-33 Nm).
Parent topic: Assembly Procedure