Assemble Frame Components

  1. Install screws, washers, and locknuts securing the base frame assembly to the tower frame using an 8mm Allen wrench and a 17mm wrench.
    Item Description Qty.
    1 Base Frame Assembly 1
    2 Tower Frame 1
    3 Screw, M10 x 1.5, 25mm 4
    4 Screw, M10 x 1.5, 110mm 2
    5 Washer, Flat 3/8" 8
    6 Nut, M10 x 1.5, Hex Nylock 2
    7 Hole Plug, ½" 2

    Hand tighten hardware.

  2. Install hole plugs to the tower frame.
  3. Install screws and washers securing the cross brace to the tower frame using an 8mm Allen wrench.
    Item Description Qty.
    1 Cross Brace 1
    2 Tower Frame 1
    3 Screw, M10 x 1.5, 25mm 4
    4 Washer, Flat 3/8" 4

    Hand tighten hardware.

  4. Install screws, washers, and locknuts securing the main frame assembly to the base frame assembly and cross brace using an 8mm Allen wrench and a 17mm wrench.
    Item Description Qty.
    1 Main Frame Assembly 1
    2 Base Frame Assembly 1
    3 Cross Brace 1
    4 Screw, M10 x 1.5, 120mm 6
    5 Washer, Flat 3/8" 12
    6 Nut, M10 x 1.5, Hex Nylock 6

    Hand tighten hardware.

  5. Tighten all the hardware to 20-25 ft-lb (27.1-33.9 Nm).
Parent topic: Assembly Procedure