Install Seat and Back Pads

  1. Install screws and washers securing the seat pad to the seat frame assembly using an 8mm Allen wrench.
    Item Description Qty.
    1 Seat Pad 1
    2 Washer, Flat 3/8" 2
    3 Screw, M10 x 1.5, 30mm 2

    Tighten hardware to 40-50 in-lb (4.5-5.6 Nm).

  2. Install screws and washers securing the back pad to the seat frame assembly using an 8mm Allen wrench.
    Item Description Qty.
    1 Back Pad 1
    2 Washer, Flat 3/8" 2
    3 Screw, M10 x 1.5, 25mm 2
    4 Hole Plug, 1" 2

    Tighten hardware to 40-50 in-lb (4.5-5.6 Nm).

  3. Install hole plugs to the seat frame assembly using a rubber mallet.
Parent topic: Assembly Procedure