Assemble Frame Components

  1. Install screws, washers, and locknuts securing the cross brace to the bottom of the main frame using an 8mm Allen wrench and a 17mm wrench.
    Item Description Qty.
    1 Cross Brace 1
    2 Main Frame 1
    3 Screw, M10 x 1.5, 120mm 2
    4 Washer, Flat 3/8" 4
    5 Nut, M10 x 1.5, Hex Nylock 2

    Hand tighten hardware.

  2. Install screws, washers, and locknuts securing the stability bracket and tower to the cross brace using an 8mm Allen wrench and a 17mm wrench.
    Item Description Qty.
    1 Tower Frame 1
    2 Cross Brace 1
    3 Stability Bracket 1
    4 Screw, M10 x 1.5, 110mm 1
    5 Screw, M10 x 1.5, 120mm 1
    6 Washer, Flat 3/8" 4
    7 Nut, M10 x 1.5, Hex Nylock 2
    8 Hole Plug, ½" 2

    Hand tighten hardware.

  3. Install hole plugs to the tower.
  4. Install screws, washers, and locknuts securing the arm pad mount assembly to the main frame using an 8mm Allen wrench and a 17mm wrench.
    Item Description Qty.
    1 Arm Pad Mount Assembly 1
    2 Main Frame 1
    3 Screw, M10 x 1.5, 25mm 2
    4 Washer, Flat 3/8" 4
    5 Nut, M10 x 1.5, Hex Nylock 2

    Hand tighten hardware.

  5. Tighten all the hardware from Steps 1-4 to 20-25 ft-lb (27.1-33.9 Nm).
Parent topic: Assembly Procedure