Insert Inspection

Inspect insert within the strain-relief cable end assembly and replace if any sign of damage.
  1. Check around plastic insert and the plastic housing for any excessive wear or damage.
    Item Description Qty.
    1 Plastic Insert 1
    2 Plastic Housing 1
  2. Replace plastic insert if cracked, torn, separated, overly worn or damaged in any way.
    Item Description Status
    1 Insert - No damage Use
    2 Insert - Cracked Replace
    3 Insert - Separated Replace
  3. Using a 4mm hex wrench, remove screws from the housing/link and the damaged insert from cable assembly. Replace damaged insert, reassemble components and tighten to 8-10 in-lbs (0.9-1.1 Nm).
    Item Description Qty.
    1 Cable Assembly 1
    2 Housing 1
    3 Screw; M5 X 0.8 HXS SOC 2
    4 Insert 1
    5 Link 1
Parent topic: Cable Handling Guide