Assemble Frame

The following procedure applies to the DB3SS.
  1. Remove hex bolts, washers, and hex nuts securing saddles to top tray using a 16mm socket wrench and 17mm socket wrench.
    Item Description Qty.
    1 Saddle 4
    2 Top Tray 1
    3 M10 x 25mm Hex Bolt 4
    4 3/8" Flat Washer 4
    5 M10 Hex Nylock Nut 4
  2. Loosely install bolts, washers, and hex nuts securing the trays onto the left frame using an 8mm Allen wrench and a 17mm socket wrench.
    Item Description Qty.
    1 Left Frame 1
    2 Tray 3
    3 M10 x 25mm Bolt 6
    4 3/8" Flat Washer 6
    5 M10 Hex Nylock Nut 6
  3. Repeat step to install trays to the right frame.
  4. Install hex bolts, washers, and hex nuts securing saddles to top tray using a 16mm socket wrench and 17mm socket wrench.
    Item Description Qty.
    1 Saddle 4
    2 Top Tray 1
    3 M10 x 25mm Hex Bolt 4
    4 3/8" Flat Washer 4
    5 M10 Hex Nylock Nut 4
  5. Tighten all bolts to 20-25 ft-lbs (27-33 Nm).
Parent topic: Assembly Procedure