Channel Menu Satellite Source

For ATV/DTV see Channel Menu ATV/DTV.

Auto Tuning

  1. Press / button to select Auto Tuning, then press Enter / button to enter.
  2. Press MENU button to call out the main menu.
  3. Highlight Channel using navigation buttons and press OK to enter.
  4. Highlight Auto Tuning and press OK to enter.
Country: Select your country.
Satellite: Select an available satellite.
Scan Mode: Select your scan mode.
Channel Type: Select a channel type.
Service Type: Select a service type.

Dish Setup

  1. Press / button to select Dish Setup. Press Enter / button to enter.
  2. Press MENU button to call out the main menu.
  3. Highlight Channel using navigation buttons and press OK to enter it.
  4. Highlight Dish Setup and press OK to enter it.
  5. Press LEFT/RIGHT navigation button to highlight Left, Middle, or Right column.
  6. Press EXIT button to return.

A. When the Satellite (Left) column is highlighted:

  1. Press Yellow button to enter Add menu.
    Satellite Name Press RIGHT navigation button to enter rename page. Use navigation buttons to complete a new name.
    Longitude Direction Press LEFT/RIGHT navigation button to select desired option.
    Longitude Angle Press LEFT/RIGHT navigation button to move the cursor and press number buttons on remote control to input desired value.
    Band Press LEFT/RIGHT navigation button to select desired option.
  2. Press Green button on remote control to enter Edit menu. The operations of Edit menu are the same as Add menu.
  3. Press Blue button on remote control to enter Scan menu.
    1. Press UP/DOWN navigation button to highlighted desired item.
    2. Press RIGHT navigation button to select desired Scan Mode, Channel Type, and Service Type.
  4. Press Red button to delete.
  5. Press EPG button to switch Satellite and Transponder.

B. When the Transponder (Middle) column is highlighted:

  1. Press Yellow button to enter Add menu.
    Frequency Press LEFT/RIGHT navigation button to move the cursor and press number buttons on remote control to input desired value.
    Symbol (ks/s) Press LEFT/RIGHT navigation button to move the cursor and press number buttons on remote control to input desired value.
    Polarity Press LEFT/RIGHT navigation button to select desired option.
  2. Press Green button on remote control to enter Edit menu. The operations of Edit menu are the same as Add menu.
  3. Press Blue button on remote control to enter Scan menu.
    1. Press UP/DOWN navigation button to highlighted desired item.
    2. Press LEFT/RIGHT navigation button to select desired Scan Mode, Channel Type, and Service Type.
  4. Press Red button to delete.
  5. Press EPG button to switch Satellite and Transponder.

C. When the Ku_ASTRA… (Right) column is highlighted:

LNB (Low Noise Block) Type Press LEFT/RIGHT navigation button to enter submenu. Then use UP/DOWN navigation button to select desired option.
LNB Power Press LEFT/RIGHT navigation button to select desired option.
22 kHz Press LEFT/RIGHT navigation button to select desired option.
Toneburst Press LEFT/RIGHT navigation button to select desired option.
DisEqc1.0 (Digital Satellite Equipment Control) Press LEFT/RIGHT navigation button to select desired option.
DisEqc1.1 Press LEFT/RIGHT navigation button to select desired option.
Motor Press LEFT/RIGHT navigation button to select desired option.
Parent topic: Configuration