Stall Bar

  1. Attach upper section of stall bar assembly.
    Item Description Qty.
    1 Screw, M10 x 1.5, 130mm 4
    2 Spacer 4
    3 Socket Nut 4
    4 Stall Bar Weldment 1

    Tighten hardware to 20-25 ft-lb (27-33 Nm).

  2. Attach lower section of stall bar assembly.
    Item Description Qty.
    1 Screw, M10 x 1.5, 130mm 4
    2 Spacer 4
    3 Socket Nut 4
    4 Stall Bar Weldment 1

    Tighten hardware to 20-25 ft-lb (27-33 Nm).

  3. Install chin up.
    Item Description Qty.
    1 M10 Nut 4
    2 Spacer 4
    3 3/8 x 1.25 OD Washer 4
    4 Screw, M10 x 1.5, 140mm 4
    5 Chin Up Weldment 1

    Tighten hardware to 20-25 ft-lb (27-33 Nm).

Parent topic: Assembly