Pullout Force
Life Fitness specifies Hilti™ static and dynamic anchors. According to the anchor manufacturer, the recommended design pullout force (in tension) for the specified anchors, when properly installed in cracked concrete, is provided in the side table. This table should be used for reference only; for additional and up-to-date information on the anchor capabilities or the design pullout force in other substrates, please consult Hilti directly at https://www.us.hilti.com.
| Selected Anchor | Design Resistance in Tension * |
|---|---|
| KH-EZ 1/4" x 4” | 830 lb |
| HUS-H 6MM x 120MM | 3.3 kN |
| KH-EZ 3/8” x 4” | 1535 lb |
| KH-EZ 3/8” x 5” | 1535 lb |
| HUS-H 8MM x 120MM | 3.3 kN |
| HUS-H 8MM x 150MM | 3.3 kN |
| HSL-3 and HSL4 M 8/40 | 2000 lb |
| HST M12 x 115/20 | 8 kN |
| HST M12 x 195/200 | 8 kN |
| KB-TZ 3/8” x 3-3/4” | 1615 lb |
* Design strength extracted from the Hilti Anchor Fastening Technology Manual.